THEORETICAL ANALYSIS OF THE FIBER FLOW MOVEMENT UNDER THE INFLUENCE OF COLUMNS

Authors

Avazbek Azamatovich Obidov, Namangan Institute of Engineering and Technology, Namangan city, Republic of Uzbekistan, DSc, Professor, https://orcid.org/0000-0002-6647-5629Follow
Rashid Gulomjonovich Rakhimov, Namangan Institute of Engineering and Technology, Namangan city, Republic of Uzbekistan, PhD, https://orcid.org/0009-0008-9254-4676Follow

Abstract

During the study, the optimal design for testing the improved fiber cleaning device was initially selected, and a process flow diagram of the fiber cleaning chamber was created for theoretical studies. According to this process flow diagram, based on theoretical studies, the behavior of fibers in the grate of the fiber cleaning device was studied, and the effect of changing the geometric parameters of the grates on the cleaning efficiency was determined. Using the developed mathematical model, graphs were constructed for the dependence of the fiber flow rate on the angle of coverage at different values of the angular speeds of the saw cylinder. From the graphs it is evident that when choosing a rational value for the distance between the grates, the cleaning efficiency from small impurities increases due to the effect of the grate positions on the fiber flow.

The results of the studies carried out in the article relate to the cotton ginning industry and are devoted to improving the fiber cleaning device in the technological process.

First Page

66

Last Page

69

References

1. Mangutov R.A., Olimov O.T., Akhmedov D.A., Lugachev A.E. (2006). Improvement of the process of cleaning medium-fiber grades of fiber in order to increase the efficiency of fiber cleaners and reduce the loss of spinning fiber in waste. Report of topic 0603. JSC "Paxtatozalash IIChB", Tashkent.
2. Miroshnichenko G.I.(1972). Fundamentals of designing machines for primary processing of cotton. Moscow: Mechanical Engineering, p. 486.
3. T.R.Rashidov, Sh.Shoziyotov, K.B.Muminov (1990). Fundamentals of Theoretical Mechanics. Tashkent: O‘qituvchi. pp. 497-504.
4. Primary processing of cotton. Ed. E. Zikriyoev. (2002). Tashkent: Mehnat.
5. Ruixiu Sui, J.Alex Thomasson. (2010). Effect of machine-fiber interaction on cotton fiber quality and foreign-matter particle attachment to fiber. Journal of Cotton Science. 14, 145–153.
6. R.G. Rakhimov. (2023). Clean the cotton from small impurities and establish optimal parameters. The Peerian Journal. 17, 57-63. https://peerianjournal.com/index.php/tpj/article/view/537
7. F.G. Uzoqov, R.G. Rakhimov. (2023). Calculation of cutting modes by milling. DGU 22812.
8. Sh. Korabayev, J. Soloxiddinov, N. Odilkhonova, R. Rakhimov, A. Jabborov, A.A. Qosimov. (2024). A study of cotton fiber movement in pneumomechanical spinning machine adapter. E3S Web of Conferences. 538, 04009. https://doi.org/10.1051/e3sconf/202453804009
9. Rakhimov R.G. (2024). Cotton fiber cleaning - problems and solutions. Scientific Journal of Mechanics and Technology, Special Issue No.2, 336-342.
10. Sevostyanov A.G. (2007). Methods and means of studying mechanical and technological processes of the textile industry. Moscow State Technical University named after A.N. Kosygin, 648.
11. Rakhimov R.G. (2024). Study of the process of cleaning cotton fiber. International scientific and practical conference of NamMTI, Namangan, Uzbekistan.
12. Obidov A., Rakhimov R. (2024). Study of the efficiency of domestic direct-flow fiber cleaners. "Fundamental and practical problems of semiconductor physics: solutions and prospects". International scientific and practical conference, NamMTI, October 4-5, 15-20.
13. Kuliev T.M., Maksudov E.T., Sulaymonov R.Sh., Aminov H.Kh. (2018). Double-drum straight-through fiber cleaner for cleaning fiber of difficult-to-clean selections. XIV International scientific-practical conference, part 1. Penza, Russian Federation, August 14, 79-82.
14. Loginov B.V. (1975). Research of quality of raw cotton collected by cotton harvesting machines with compound spindles. Report on topic No. 14. Central Research Institute of Cotton Industry.
15. R.G. Rakhimov. (2023). Clean the surface of the cloth with a small amount of water. Scientific Journal of Mechanics and Technology. 2(5), 293-297.
16. Ismailov A.A. (1988). Increasing the efficiency of cotton fiber cleaning. PhD Thesis. Tashkent.
17. Olimov O.T., Agzamov M.M. (2014). Innovative technologies for the production of high-quality cotton fiber. Young scientist, 19, 231-234.
18. Makhkamov R.G. (1989). Improving the technological reliability of cotton ginning machines operating in impact mode. Tashkent: Fan, 151 p.
19. Lugachev A.E. (1996). New approaches to the development of effective processes of feeding and cleaning fibrous material to feeders in the line-flow technology of a cotton mill. “Pakhtachilik“ Scientific and Technical Journal. 4, 25-27.
20. R.G. Rakhimov. (2023). A cleaner of raw cotton from fine litter. Scientific journal of mechanics and technology. 2(5), 287-292.

Recommended Citation

Obidov, Avazbek Azamatovich and Rakhimov, Rashid Gulomjonovich (2025) "THEORETICAL ANALYSIS OF THE FIBER FLOW MOVEMENT UNDER THE INFLUENCE OF COLUMNS," Technical science and innovation: Vol. 2025: Iss. 1, Article 12.
DOI: https://doi.org/10.59048/2181-1180.1684
Available at: https://btstu.researchcommons.org/journal/vol2025/iss1/12