Abstract
Annotation. The article analyzes the separation of harmful impurities in the air flow from various machines during the initial processing of cotton, ways to clean the dusty air released from the dust, dusty air from the air extracted from dust extractors and pneumatic transport installations and dust and contaminants before release into the atmosphere. The causes and ways to reduce the release of large amounts of dust at all stages of the primary processing of cotton, which can reduce air pollution in production facilities and air, worsen the working conditions of workers and employees and lead them to occupational diseases, especially silicosis. The issue of decontamination of ginneries has been proven to be of paramount importance due to the increasing pollution of machine-picked cotton. Today, with the widespread introduction of machine picking, the ginning industry is urgently needed not only to improve the technological process of receiving, storing and processing cotton, its drying, cleaning and processing, but also to improve dedusting and air purification systems. theoretical and practical research on the need for measures to be implemented. Dusty air is initially coarse, moderate, and water purification percentages of cleaning efficiency are given. The results were analyzed and optimal parameters were recommended.
First Page
79
Last Page
87
DOI
https://doi.org/10.51346/tstu-01.21.3-77-0133
References
References:
[1] I.Z. Abbazov, "Development of a technology for air purification from cotton processing" Dissertation. Tashkent - 2018.
[2] O.J. Murodov, Textbook "Repair of network machines" 5320300-Technological machines and equipment (textile, light and cotton industry) Tashkent-2019. 515 BC
[3] Zikrioev E. Textbook "Primary processing of cotton" Tashkent - 2002. 408 p.
[4] O.J.Murodov, "Scientific research to determine the amount of fibrous waste in dusty air." Actual problems of innovative technologies of cotton ginning, textile, light industry, printing production and their solutions in the context of the integration of science, education, production. Republican scientific and practical conference. Part I, Sections II. April 21-22. Ttesi. Tashkent-2021. 99-100 g.
[5] O.J.Murodov., A. Djhuraev., “Investigation of vibrations of a lightweight grate on elastic supports of a raw cotton cleaner from large litter in case of random disturbance” TashDU Bulletin No. 2, 2017, pp. 95-100.
[6] C.J. Stairmand, The design and performance of cyclone separators, Trans. Inst. Chem. Eng. 29 (1951) 356–372
[7] Khojiev MT, Abbazov IZ, Sangirov S., Comparative analysis of the work of dust collectors in ginneries // Actual problems of innovative technologies in the context of integration of science, education and production. Tashkent 2014 November 20-21 B.176-178.
[8] Baltaev U.S. Intensification of the process of sedimentation of fibrous particles in a gravitational field and the development of a highly efficient dust collector // Diss. doc. Those. Science. - Tashkent, 2008 .-- 148 p.
[9] Bahrami A., Ghorbani F., Mahjub H., Golbabei F., Aliabadi M. Application of traditional cyclone with spray scrubber to remove airborne silica particles emitted from stone-crushing factories // Industrial Health 2009-ISSN:0019-8366 47 (4), с. 436-442
[10] Kudratov A.K. Development and implementation of effective methods for complex purification of air emitted into the atmosphere at enterprises of primary processing of textile raw materials // Diss. doc. those. sciences. - Tashkent, 2000.-267 p.
[11] Gordon G.M.,Peisakhov I.L.Dust collection and gas purification in non-ferrous metallurgy-M .: "Metallurgy", 1977 - 144 p.
[12] Romankov P.G., Kurochkina M.I. Hydromechanical processes of chemical technology // 2nd ed., Revised. and additional-L .: "Chemistry", 1974.-288 p.
[13] Kharoua N., Khezzar L., Nemouchi Z Study of the pressure drop and flow field in standard gas cyclone models using the granular model // International Journal of Chemical Engineering 2011- ISSN:1687-806X 79 c. 12-18
[14] O Murodov. PAPER • OPEN ACCESS. Development of an effective design and justification of the parameters of the separation and cleaning section of raw cotton. To cite this article: O Murodov 2021 J. Phys.: Conf. Ser. 1889 042012.
[15] Murodov O 2019 Perfection of designs and rationale of parameters of plastic Koloski cleaning cleaners International Journal of Innovative Technology and Exploring Engineering 8(12) 2640-6.
[16] Gazieva, S.A., Kurbonov, B.D., Nurov, M.E., Ibrogimov, H.I., Rudovsky, P.N.
Change of structural index of raw-cotton by technological transitions of its processing Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti, 2013, (5), pp. 131–134
Recommended Citation
Adilova, A; Murodov, O J.; and Rudovskiy, P N.
(2021)
"ANALYSIS OF HARMFUL MIXTURES IN AIR FLOW DURING COTTON CLEANING,"
Technical science and innovation: Vol. 2021:
Iss.
3, Article 5.
DOI: https://doi.org/10.51346/tstu-01.21.3-77-0133
Available at:
https://btstu.researchcommons.org/journal/vol2021/iss3/5