Abstract
An approach for defining critical temperatures of buckling for a pivotally resting plane cylindrical shell has been considered. Operation in various climatic zones leads to buckling of roof elements of passenger cars. In connection with that, it is necessary to have a theoretical justification of structural solutions taking into account critical temperatures of buckling of shell elements. The roof element of the passenger car should be classified as plane cylindrical shells. An expression for defining critical temperatures by the Bubnov-Galerkin method has been obtained, as well as the equations of plane cylindrical shells proposed by V.Z. Vlasov. The results calculated with the derived expression have been verified by comparison with those obtained by the finite element method (FEM). This comparison has demonstrated satisfactory agreement of these results.
First Page
270
Last Page
274
References
1. Volmir A.S. Stability of systems under deformation. Moscow, Nauka, 1967, 984p.
2. Pogorelov V.I. Stroitel’naya mexanika tonkostennix konstruktsiy. SPv.: BXV-Peterburg, 2007. 528 s.
3. Konstruirovanie I raschot vagonov: uchebnik/ V.V.Lukin, P.S. Anisimov, V.N. Koturanov i dr.; pod red. P.S. Anisimova. —2-e izd., pererab i dop. — M.: FGOU «UMTS», 2011.- 688 s.
4. Ispol’zovanie paket ANSYS dlya proektirovaniya detaley aviatsionniix redakturov: ucheb.posobie / V.B.Balyakin, A.G. Kojin. - Samara: Izd-vo Samar, gos. aerokosm, un-ta, 2007. - 44 s.
5. Utilin V.V., Physically non-linear analysis of structure stability. StP., GIORD, 2007, 96p.
6. Trebushko O.I Osnovii teorii uprugosti i plastichnosti – Москва: Наука,1984,320 с.
7. Golovanov A.I., Berjnoy D.V. Metod konechniix elementov v mexanike deformiruemiix tverdiix tel. -Kazan: izd-vo «DAS», 2001. –300s.
8. Fadeev A.B Metod konechniix elementov v geomexanike. - M.:Nedra,1987, 221s.
9. Cing-Dao K., Dhafer M., Goerge T.B., Naih.E.B.. “Crashworthiness Evalution Using Integrated Vehiscle and Occupant Finite Element Models”. Internation Journal of Crashworthiness,pp:387-398,2001.
10. Pradeep M., Chung-Kyu P., Dhafer M., et al. “LSTC/NCAC Dymmy Model Development”. 11th International LS-DYNA User Conference,2010
11. Xaldjigitov A.A., Xudazarov R.S., Sagdullaev D.A. Teorii plastichnosti I termoplastichnosti anizotropniix tel -T.: Fan va texnologiya, 2015, 320 s.
12. Carl.T.F Ross Finite element techniques in structural mechanic. –International publishers, Coll House, Westergate,England-1996,206 p
13. Ahkmedov A.B Shamsiev D.N. Neklassicheskaya teoriya plastin slojnoy konfiguratsii s peremennoy tolshinoyНеклассическая теория пластин сложной конфигурации с переменной толщиной Vestnik TGTU –Tashkent, 2013.,–№2.–C.14–23
14. Begmatov A.,Mamatova N.T. Zadacha o vnezapnom nagrujenii uprugo-plasticheskogo sterjnya, vzaimodeystvuyushego s okrujayushey sredoy // «Problemii mexanike».- 2019, №2 .Tashkent
15. Ibodulloev Sh.R., Tilovov O. O’ Kompozit materiallarini nochiziqli deformatsiyalanishini ANSYS dasturida modellashtirish// “XXI asrda ilm-fan taraqqiyotining rivojlanish istiqbollari va ularda innovatsiyaning tutgan o’rni” respublika ilmiy konferensiyasi. http://doi.org/10.26739/online_4 2019, №4. .414-416b.
Recommended Citation
Grigoriev, P. S; Ibodulloev, Sh. R; and Poyonov, V.B
(2019)
"AN APPROACH FOR ESTIMATING CRITICAL TEMPERATURES OF BUCLING OF SHALLOW CYLINDRICAL SHELLS.,"
Technical science and innovation: Vol. 2019:
Iss.
2, Article 9.
DOI: https://doi.org/10.51346/tstu-01.19.2.-77-0029
Available at:
https://btstu.researchcommons.org/journal/vol2019/iss2/9